List of products by brand Viadana

Single block with Viadana becket with 38mm pulley for 10mm rope

1/4" Delrin Balls for Viadana Trolleys

Single block from Viadana with 57mm pulley for sheet with a maximum diameter of 12mm. The stainless steel balls of this block work between two steel caps to distribute the load in a perfectly homogeneous way, thus avoiding even under strong stress, the formation of cavities in the pulley and the ovalization of the balls. The block has a steel block that, once removed, allows the rotation of the head.

Double ball bearing block with becket from Viadana with 34mm sheave for 8mm sheet

Fixing strap for mast or boom of about 50 mm with 5 mm holes and length of 80 mm

Curved base pole attachment - Ø6mm ring - Ø5mm holes

Female or female pin for rudder width 35mm with hole Ø8mm. A: 17mm S: 35mm D: 5mm L: 132mm E: 10mm

Stainless steel perforated plate, length 205 mm and width 19 mm, thickness 2.5 mm and 8 mm holes

Stainless steel perforated plate, length 145 mm, width 19 mm, thickness 2.5 mm and 8 mm holes

4-hole stainless steel bridge. 34 and 65 mm centre distance with 5 mm holes, internal height of 14 mm

Blue upper guide for Viadana choke 47x23x20h

Yellow upper guide for Viadana choke 64x30x28h

Red upper guide for Viadana choke 64x30x28h

Black upper guide for Viadana choke 64x30x28h

High front bridge choke Viadana 64x30x28h

Carbon fiber choke from Viadana with the following measurements 64x30x28h and maximum load of 110 Kg. Maximum sheet diameter 14 mm, hole diameter 5 mm and centre distance of 38 mm

Blue upper guide for Viadana choke 47x23x20h

Yellow upper guide for Viadana choke 47x23x20h

Red upper guide for Viadana choke 47x23x20h

Black upper guide for Viadana choke 47x23x20h

Rear guide for Viadana choke 47x23x20h

Small plate for stainless steel spring for pulleys

Large plate for stainless steel spring for pulleys

Long stainless steel spring for pulleys. Approximate diameter of 20mm and approximate height of 60mm