Rings, u-bolts, eye-bolts and jumpers

Bridge With Flat Base

Rectangular Plate With Ring Ø6

In polished AISI 316 stainless steel. For cables mm 3/4 Thread M4

Clamp stainless for the shrouds

Terminal screws stainless steel 9/10 mm. In polished AISI 316 stainless steel. For cables mm 9/10 M8 Thread

Terminal screws stainless steel 11/12 mm. In polished AISI 316 stainless steel. For cables mm 11/12 Thread M10

Terminal screws stainless steel 6mm. In polished AISI 316 stainless steel. For cables from 6 mm Thread M5

Stainless steel ring mm 6x60. AISI 316 stainless steel hot-pressed without welding. Are of the utmost robustness and reliability, mirror polished.

Eyebolt abbatibile 6mm of Wichard

Eyebolt abbatibile 8mm Wichard

Swivel Base - pin Ø 5 mm hole spacing 35 mm - hole Ø mm 5

Jumper soldered (Ø 5 mm) on the base curve, horizontal. Shaft Ø60 mm approx. Øfori 4mm Øinterno eye 14mm

Jumper soldered (Ø 5 mm) on a vertical bend. Shaft Ø60 mm approx. Øfori 4mm Øinterno eye 14mm

Swivel Base for block - outer-Ø mm 57 Ø pin mm 5 hole Ø mm 5

U-bolt welded on the basis of the four-hole outer-Ø 55 mm - hole Ø mm 5

Passascotta nylon centre Distance: 19mm Holes 3mm For sheet max 6mm

Passascotta nylon centre Distance: 32mm Hole 5mm For sheet max 10mm

Passascotta nylon centre Distance: 22mm Holes 4mm For sheet max 6mm

Hook or jumper, twisted Ø holes on 5mm

U-bolt bridge in stainless steel 40 mm

Ø6 mm jointed half ring with 51x32 mm stainless steel base

Collapsible ring in stainless steel 48 x 49 mm

Stainless steel eyebolt M8x80mm