Optimist

The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast step spring lock can be purchased. The stainless steel spring prevents the nut from turning accidentally. There is no need for additional locking nuts anymore.

The only perfect rudderfittings for the Optimist. Used on all top racing Optimists. Pin diameter 6 mm. (According to I.O.D.A. class rules). This set contains 2 transom gudgeons and 2 backing plates.

Racing Optimist deckcollars with an oval and tapered inner diameter. The oval inner diameter allows the maximum fore/aft play and minimum side play. The tapered inner diameter allows the mast to be raked. 4 countersunk mounting holes. Hole size in deck: 57 mm.

Standard nylon mast deckcollar for Optimist. Hole size in deck: 53 mm

Protest flag. Little pouch with a cord at the top to tie it to the boom and a Velcro closure at the bottom. Pull the bottom cord and the protest flag comes out.

Optimist vang for all racing booms from Optiparts. 

Inboard end for 32mm standard boom (for EX1030). 

Optiparts owns several moulds for producing custom end fittings. 

All boom end fittings are made of high quality glass fibre filled nylon. 

Unlike inboard Optimist boom end fittings from other manufacturers 

ours have a firm grip around the mast.This ensures that mast and 

boom always turn together. 

Diameters given are outside tube diameters.

Optiparts top pins for Optimist mast, which do not cut the lines, as supplied with racing masts. =set of 2=

Lacing eye bridge as used on the Blackgold boom from Optiparts

Replacement pin stop as used on the Blackgold mast for Optimist. Provides more effective Optimist downhaul function for Blackgold mast.

Pins stop for Optimist spars as used on the Silver and School spars from Optiparts.

Outboard end for 40mm racing boom (EX940). 

Optiparts owns several moulds for producing custom end fittings. 

All boom end fittings are made of high quality glass fibre filled nylon. 

Unlike inboard boom-end fittings from other manufacturers ours 

have a firm grip around the mast.This ensures that mast and boom 

always turn together. 

Diameters given are outside tube diameters.

Optimist sprit ends for 25mm Standard sprit. Per pair.

Our Kinetic Junior Short Hikepants are made from a lightweight durable construction with a durable Heavy duty nylon CORDURA©  
Featuring removable reinforced pads, Adjustable webbed belt and thigh straps for the perfect fit. Their Pre-shaped design makes them perfect for putting over drysuits in the cold or just over shorts in the summer.

These Optimist buoyancy bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC coated nylon. Some bags are available with a twist lock tube valve.This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48L bags are slightly heavier than 43L bags but after a capsize there is a lot less water in the boat.

For Optimist blades up to 15 mm thick. The only perfect rudder retaining clip for the Optimist rudder blade.

15mm stainless steel ring for Optimist mainsheet. As used on an Optimist boom bridle.

Stainless steel lock to secure your Optimist mast from coming out of its step when the boat is capsized. This mastlock has a rubber insert and should be clamped around the mast just under the deck. We suggest you use the collar in addition to the rope locking system to create double security. The lock will be provided with a line to attach it to the maststep.

The only perfect rudderfittings for the Optimist. Used on all top racing Optimists. Pin diameter 6 mm. (According to I.O.D.A. class rules). For Optimist blades up to 15 mm thick. This set contains 1 long rudder pintle and 1 short rudder pintle.

Deluxe Jamaica special Optimist tiller extension, black anodized aluminium with a releasable rubber joint / swivel and long multicoloured foam grip. The joint incorporates a fibre core molded up in the centre. This fibre core will avoid complete failure should the rubber tear.

Deluxe Optimist tiller extension, black anodized aluminium with a releasable rubber joint / swivel and long black eva foam grip. The joint incorporates a fibre core molded up in the centre. This fibre core will avoid complete failure should the rubber tear.

Bag for optimist boards, tiller and extra parts

Telone sopra optimist

Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening

Snodo stick

The Super Dinghy Sheet from FSE Robline is ideal for use in single-handed dinghies and all applications where a low weight matters.  It is the sheet for sailors looking for a durable cover with minimal water absorption and low kinking tendency.

Aluminium Optimist tiller. 2 rectangular aluminium tubes mounted together. Plastic end caps. Size of tubes 10 x 20 x 1.5 mm. Suitable for all sizes of Optimist rudderblades. With bolts, nuts and washers to mount on rudderblade. Weight 265 grams.

Meets safety regulations required for boats that navigate 1 mile from the coast; specially designed for surf-boards; can be stacked; clip-on mounting with 3 special pins.

Fully padded out protection with a soft nylon inner to keep your foils scratch and ding free. Full lenght bag allows tiller and extension to be kept inside. Mesh pocket and padded shoulder strap and carry handle.

Fully padded, tarp lined protection for your top/bottom section and boom. Bag rolls up and is secure with webbing strap. Can be used for trailing or car topping and ensures your spars are clean and damage free.

This releasable rubber joint / swivel for tiller extionsions is mounted with an aluminium pin only. The pin is kept in place by a piece of heat shrinkable tubing. To remove a joint : simply cut off the tubing and push the pin out. The joint incorporates a fibre core molded up in the centre. The fibre core will avoid complete failure should the rubber tear which allows you to finish the race. The distance between the mounting hole centers is 32 mm.