Accessories hull

The most popular round type maststep for the Optimist dinghy. This Optimist maststep has an oval cup, which allows the mast to tilt forward when going downwind. Different mast rakes can easily be repeated using the scale on the base. Separately a mast step spring lock can be purchased. The stainless steel spring prevents the nut from turning accidentally. There is no need for additional locking nuts anymore.

The only perfect rudderfittings for the Optimist. Used on all top racing Optimists. Pin diameter 6 mm. (According to I.O.D.A. class rules). For Optimist blades up to 15 mm thick. This set contains 1 long rudder pintle and 1 short rudder pintle.

Gommini per scassa deriva optimist

Plate in stainless steel with two holes for mounting straps footrests, and sausages Optimist

Agugliotto long for rudder optimist. Pin diameter 6 mm, for blades up to 15mm thick as per regulations of the I. O. D. A.

The flag of protest: the Bag with a rope at the top to tie it to the boom and a velcro closure at the bottom. By pulling the cord the lower the flag of protest comes out.

Coaming standard nylon Optimist. Hole size in deck: 53 mm

Coaming Optimist with an inside diameter of oval and tapered. The diameter of the inner oval allows the maximum lengthwise play and minimum side play. The inside diameter is tapered allows the rake to the mast. 4 countersunk mounting holes. Hole size in deck: 57 mm.

Femminella for rudder optimist

Stainless steel lock to secure your Optimist mast from coming out of its step when the boat is capsized. This mastlock has a rubber insert and should be clamped around the mast just under the deck. We suggest you use the collar in addition to the rope locking system to create double security. The lock will be provided with a line to attach it to the maststep.

These Optimist buoyancy bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than buoyancy bags made of PVC or PVC coated nylon. Some bags are available with a twist lock tube valve.This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48L bags are slightly heavier than 43L bags but after a capsize there is a lot less water in the boat.

Coaming for Optimist of the Optiparts made of Delrin, 4 countersunk mounting holes. Size of hole: 57 mm.