470

This releasable rubber joint / swivel for tiller extionsions is mounted with an aluminium pin only. The pin is kept in place by a piece of heat shrinkable tubing. To remove a joint : simply cut off the tubing and push the pin out. The joint incorporates a fibre core molded up in the centre. The fibre core will avoid complete failure should the rubber tear which allows you to finish the race. The distance between the mounting hole centers is 32 mm.

Choke keystone of the Clamcleat CL253AN anodized. 90x18x35h

Made of durable nylon and abrasion-resistant for minimum weight and corrosion resistance. The design of the beak snap allows attachment to the loop polar without having to manually open the bolt. The point of attachment to the release lines of the pins.

Choke of the Clamcleat CL203 alloy. Suitable for dinghies or dinghy as the 420, 470, 29er, 49er for the adjustment of the harness.

Choke of the Clamcleat CL230-anodized aluminum. Suitable for dinghies or dinghy as the 420, 470, 29er, 49er for the adjustment of the harness.

Thickness drift suitable for any type of dinghies like the 420 and 470.

Elastico per derive colore giallo

Stick Ronstan alloy by the length of 1030mm, great for boats like the 420 or the 470.

Pivot stick

Stick of the Optiparts Deluxe model. Suitable for boat 420. Length 100 cm.

The Super Dinghy Sheet from FSE Robline is ideal for use in single-handed dinghies and all applications where a low weight matters.  It is the sheet for sailors looking for a durable cover with minimal water absorption and low kinking tendency.