NMEA 2000 gateway linkup - J1939
zoom_out_map
chevron_left chevron_right
-10%

NMEA 2000 gateway linkup - J1939

NMEA 2000 gateway linkup - J1939. It allows the conversion of data from the J1939 protocol - used for example on Yamaha, Volvo and Yanmar engines - to the NMEA2000 one. An adapter cable is required for Volvo Penta and Yanmar engines.

€148.01 Tax included

€121.32 Tax excluded

€164.46 -10%

notifications_active Last items in stock
Security policy
Delivery policy
Return policy
Description

NMEA 2000 gateway linkup - J1939. It allows the conversion of data from the J1939 protocol - used for example on Yamaha, Volvo and Yanmar engines - to the NMEA2000 protocol. An adapter cable is required for Volvo Penta and Yanmar engines.

Easy-to-install LinkUp gateway modules replace the original wiring, providing power to both the LinkUp device and sensor from the NMEA 2000 backbone while remaining compliant with NMEA 2000 certification. Thanks to the passive wireless receiver, setup is a snap using your mobile device and the LinkUp Configurator app available for Android and iOS devices. Sensor parameters are configured based on type, instance and alert threshold on the mobile device and then connected to the LinkUp device for immediate data download. Before describing the different versions of LinkUp, we would like to highlight the fact that this device saves money compared to an oversized NMEA 2000 converter. Reduces wiring, as the complete device consists of 3 parts: a 30cm wire cable with a standard 5-pin M12 connector, the LinkUp device itself containing the device electronics, notification LED, wireless interface for programming the device and NMEA 2000 side wiring, which is the output of all LinkUp variants and finally a sensor side cable - including wires is approx. 50cm long when unrolled. The other advantages of this equipment are contactless setup with your smartphone, no need to spend money on expensive HW, installation where needed and no additional power needed as LinkUp is powered by NMEA. Last but not least, thanks to its airtight housing, the device can be installed in the engine compartment according to ISO 8846:1990 (protection against ignition of surrounding flammable gases). Like all our products, LinkUp is CE, Reach and RoHS compliant. These powerful devices are fast, powerless, safe, secure and cheap.

  • Function: Rudder, Battery, Clock, Engine RPM, Exhaust Gas Temperature, Speed, Trim, Fuel Level, Oil Temperature, Coolant Temperature, Air Pressure, Engine Hours, Boost Pressure, Transmission Oil Pressure, Engine Oil Pressure
  • Rated voltage: 12V
  • IP class: IP X9/K
  • Connectivity: NMEA 2000, SAE J1939
  • Wireless setup via companion mobile app
Data sheet
Veratron
23560W