Gray BRAVO 2005 inflation valve

Inflating valve for dinghy model BRAVO 2005 black colour.

• - Versatile valve, usable for both low and high pressure.
• - Maximum tightness thanks to the special silicone lip seal.
• - Robust and compact with an ergonomic cap.
• - PUSH-PUSH opening.

INSTALLATION

1. 1. Required hole for valve installation D36 +/- 0.5mm
2. 2. Tightening torque = 20-25 Nm The valve assembly must be re-tightened after at least 12 hours
3. 3. Users responsibility to ensure that any fluids used during installation or operation are compatible with this valve