Description
Wedge-shaped base for Ronstan c-cleats or t-cleats choke.
- The wedges (A) are stackable for larger angles or to act as a riser.
- Stack wedges (A) to increase the height of the brackets or to correct the mounting alignment to 11, 22, 33 degrees.
- You will need to use multiple wedge kits (A and B) if the required cleat angle is greater than 11 degrees.
- The smallest component is a support plate (B) which must be mounted below deck to distribute the load and help align the nuts with the angle of the fasteners.
- Only the wedge component (A) matches the cleat base and has locking pins to allow for stacking.
- See the diagram for further details on the correct configuration of these parts.
Data sheet
6 other products in the same category: