The V-Grip system is a locking mechanism patented by Antal that produces pressure on 3 sides of the textile, increasing the grip and decreasing the risk of damaging the maneuvers. All Antal models, with the exception of the Cam611, are equipped with the V-Grip system. The V-Grip system has the following features: 3-sided pressure. Unlike traditional flat cams, V-Grip uses a 'V' cam, which increases the grip on the maneuver, without the risk of wearing the sock. Load Distribution, The curved base-cam torque distributes the load of the V-Grip mechanism, preventing all pressure from concentrating on a critical point. Recovery with the lever closed, all the stoppers allow the recovery of the maneuver with the lever closed; the maneuver stops in the new position without slipping. Emergency opening in case of emergency the lever allows you to release the halyards under load without the use of a winch. The range of stoppers includes 7 different models for lines from 6 to 22 mm. All models except V-Grip maxi and VJ / VH are available in Single, Double, Triple and Quadruple versions. In addition, the Cam 611, V-Cam 611 and V-Cam 814 models are available in the Silver versions, equipped with the new ergonomic lever in silver anodized aluminum.
- Length (L) 132 mm
- Width (W) 67 mm
- Height (H) 68 mm
- Weight 1.1 kg
- Ø textile min 8 mm
- Ø textile max 12 mm
- TO 30 mm
- B. 87 mm
- C. 15 mm
- AND 34 mm
- Guy Double
- Fixing screws 4 x countersunk head
- Ø screws 6 mm
- MWL 1000 kg