List of products by brand Ultraflex

Cable Steering C8

Cable Steering C2

Controls single lever control for mounting cruscottoLow Profile B301-B302.

Control box single lever B301 chrome of the Ultraflex

Controls single lever control for mounting cruscottoLow Profile B301-B302.

X35 - wheel center Cap black, tilt 20° Compatible with steering systems T71FC, T72FC, T73NRFC, T74NRFC, T86, T91, T93ZT

10 - 32 UNF can be used on cables: C2 - C8 - MACHZero Built entirely in stainless steel.

The application of the switch L23 is necessary in the case of dual station, with the control system single lever control, and is recommended in the case of command bileva to get the best returns. Attention: when you change your driving position it is necessary to place the throttle to idle and the reverser is in neutral.

Plate and jumper stops the sheath L3, can be used on cables C2 - C7 - C8 - MACHZero.

The terminal cable can be used on cables: C2 - C8 - MACHZero

Fermafilo can be used on cable C4 - B14

Jumper stops the sheath L14, can be used on cables C2 - C7 - C8.

Kit for facades of cables C36 and MACH36 to boxes B301 and B302

Kit for adapting cable C22 to boxes bileva to the dashboard, B99, B100, B101, B102

Kit for the facades of the cable C22 to the box B103

The engine mounting fork A75 can be used on two-wire M58 - M66 - TM48.

Adaptor K66 for turn cables M66 into cables M47 with a terminal threaded.

Kit for facades of cable C22 to boxes bileva to the dashboard, B46, B50, B58, B59, B203, B204, B207, B208

Kit for facades of cables C2, C8 and MACHZero to boxes B47 and B49

Kit to adapt the cable C2 - C8 - MACHZero, engines, BRP® - Evinrude.

Mounting Kit control box B89 - B90 of the Ultraflex